Loading catalogue…
Explore brass tremolo blocks, spring claws and tremolo hardware. Match the block dimensions, mounting-screw spacing and tremolo-arm thread to your bridge and guitar body.
Shipping to Australia and the USA. Delivery rates & returns
1–10 of 10 products
Brass Tremolo Block For Gotoh Wilkinson VS100 VG300
A CNC-machined brass replacement tremolo block for Gotoh/Wilkinson VS100 and VG300 bridges. The one-piece brass construction provides a direct material upgrade for the specified bridge models; other Wilkinson bridges are not listed as compatible.
Brass Claw-Tremolo Spring Claw - Best-Seller -For Fender
A CNC-machined solid-brass spring claw for a guitar tremolo. Its 34mm hole spacing and included set screws are the key fitment details to compare with your existing claw.
Use an appropriately sized screwdriver.
2pcs brass Guitar Tremolo Spring Claw Screws Fit Fender,Floyd Rose,CNC machining
A pair of CNC-machined brass screws for a tremolo spring claw, listed for Fender and Floyd Rose applications. Compare the head, thread and overall length with your current screws before fitting.
Use an appropriately sized screwdriver; do not use in other locations.
Brass Tremolo Spring Claw - Balance Spring & String Tension -For Fender
A CNC-machined solid-brass tremolo spring claw intended to balance spring and string tension in a Fender-style setup. The listing specifies 34mm mounting spacing and supplies the claw with two set screws.
AUMSEN Fat Brass L Shape Tremolo Block 32mm
A solid-brass L-shaped tremolo block with a natural brass finish. The listing identifies the block height in the product title; compare the dimension drawing with your guitar before fitting.
AUMSEN Tremolo Springs&Claw&Screws-High quality
A tremolo spring and claw set with four springs, a reinforced claw and two screws. The listed 34mm hole spacing is the principal measurement for checking the claw against your guitar.
Non-Tremolo Hardtail Bridge 2-1/16'' space stainless steel saddles
A fixed hardtail bridge with a steel plate and non-magnetic stainless-steel saddles. Saddle height and position are adjustable for action, radius and intonation; the five mounting screws secure the string-through-body bridge to the instrument.
AUMSEN 6 Point Tremolo-brass Saddles for Strat Guitar
A six-point Strat-style tremolo assembly with brass saddles, a stainless-steel plate and a brass block. The supplied arm, springs, claw and mounting hardware cover the listed bridge components.
Aumsen Vintage/Narrow Strat Tremolo Bridge Set
A vintage/narrow Strat-style tremolo combining vintage 2-7/32" mounting spacing with modern 2-1/16" string spacing. Brass saddles and block are paired with a stainless-steel plate, with the arm, claw and springs included.
Brass Tremolo Block for Gotoh 510 FE/BS - 37mm or 42mm
A brass replacement tremolo block for the listed Gotoh 510-series models, available in 37mm and 42mm heights. Not for Gotoh 510 bridges with 52.5mm width. Check the model list and dimension diagram before fitting.
2 optionsA tremolo assembly only sustains as well as the mass it transfers string energy into. Swapping a stamped zinc block for a solid brass block is one of the most audible upgrades on a Stratocaster — the guitar gains low-end weight, the note bloom lengthens, and the tuning return tightens under heavy vibrato use. Aumsen tremolo blocks are offered for vintage and modern 6-screw and 2-point bridges, plus L-shape and narrow-spacing blocks for import guitars. Before ordering, measure the existing block width (thin 32–36 mm bodies vs 38–42 mm American bodies), the string spacing at the saddles, and the tremolo arm thread (M6 or 10-32). Spring claws and screw sets are stocked alongside the blocks for a complete replacement.
Solid brass is the default for denser sustain; steel blocks read brighter with slightly less bloom.